Trying to add gear oil to the rear of my truck. the plug is stripped how can i get it out? please help?

If you absolutely can not get the plug out, then you will have to weld a ratchet extension on, use one that is expendable and then throw both pieces away after you get a new plug.





If you have the ability, buy an oversized pan for the pumpkin.Trying to add gear oil to the rear of my truck. the plug is stripped how can i get it out? please help?
They sell a tool called a ';ez-out'; you drive it into the wrecked drain/fill plug with a drill and then back it and the wrecked drain/fill plug out.A shot of ';PB BLASTER'; brand spray rust buster lubricant around the outside diameter of the drain/fill plug will help loosen it as it creeps between the plug and the hole it's in.You will need to buy a new drain/fill plug but they are cheap.Trying to add gear oil to the rear of my truck. the plug is stripped how can i get it out? please help?
Weld an extension to the nut -


Then you can put a breaker bar on there and get it off.
Have someone weld a nut to the plug (easiest) or you can possibly use a hammer and a chisel to make the plug turn out.
a sharp blow from an air chisel may get it to turn just enough to loosen it